Best Finishes for Wood Kitchen Table

Searching for Best Finishes for Wood Kitchen Table ? Then you are at right place

In your home, kitchen is one of the most important portion. It’s where the magic of food happens and hey, everybody loves food. Everyone wants their kitchen to have a beautiful look. If you want to have a perfect look for your kitchen, then selecting the right finish for your kitchen is a significant decision one should take. 

The most important factor that needs to be in the mind of the buyer while purchasing a finish is, that it should be safe, by that I mean food comes in contact with the table, it needs to be safe when it’s dry. 

Kitchen table is one item that is used frequently, so the finish needs to be long-lasting and not fade off. As you know, to give a wooden kitchen a perfect look, it should be well-finished. By that I mean that the paint you’ll be using should be water-resistant. 

Oil paint is exceptionally impenetrable to water, which is the reason it functions admirably in kitchens. It likewise will, in general, be extremely shiny, so it’s for the most part utilized on cupboards, woodwork, and entryways. Paints arrive in various finishes, from flat to high-gloss.

Understanding Types of Wood Finishes

You can browse a wide scope of finish choices, every one with various preferences and drawbacks. Some normal sorts are: 

Oil-based

Oil completes include a touch of strength and shading to incomplete wood. They additionally secure the wood, making them perfect for kitchen use. 

Water-based

These finish dry clear, which gives your table a smooth, gleaming look 

Varnish

The varnish is an unmistakable finish that dries very gradually and might be hard to apply. As a rule, they’re best when combined with another finish. 

Shellac

This material is produced using wax and solvents. It’s anything but difficult to apply, however, it’s not strong enough for kitchen table.   

We have reviewed different types of finishes for your wood kitchen along with the pros and cons of every finish because at the end of the day choosing the right finish for your wood is a critical task. 

Best Finishes for Wood Kitchen Table

No #Kitchen Table FinishesRatingDry TimePrice
11. MINWAX 63010444 FAST DRYING POLYURETHANE CLEAR
4.54-6 Amazon Check Price
2GENERAL FINISHES ARM-R-SEAL OIL BASED4.512-24 Amazon Check Price
3RUST-OLEUM 9141H OIL POLYURETHANE4.42 Amazon Check Price
4GENERAL FINISHES ENDURO-VAR4.43-4 Amazon Check Price
5WATERLOX TB 6044 ORIGINAL4.324 Amazon Check Price
6RUST-OLEUM 284473 VARATHANE4.22-4 Amazon Check Price
7Valspar Cabot Polyurethane4.24 Amazon Check Price
8RUST-OLEUM VARATHANE4.26 Amazon Check Price

1. Minwax Fast Drying Polyurethane (Editor’s choice) 

Amazon Check Price

The First that we have on our list is specifically known as a personal favorite by many of the consumers Minwax Fast-Drying Polyurethane. It’s also one of the highly-rated products on amazon and is amazon’s choice as well which makes it the strongest product on our list. 

We have listed down some of the advantages of using Minwax 63010444. It makes your wood looks beautiful and it also provides safety to it. It is highly durable, which is the key element that you should keep in mind while purchasing a finish. 

It is perfect for carpentry, furniture, entryways, cupboards, and floors. Many of the wood finish is in particular restricted to the completed wood but this finish can be utilized on both completed and unfinished wood.

It gives excellence to inside wood surfaces, for example, furniture, floors, entryways, and cupboards. Its boss toughness makes it perfect for use on the entirety of your wood surfaces 

It also dries quickly and provides enduring insurance. It comes in different sizes ranging from quart to 2.5 gallons

It’s critical to take note of that despite the fact that this Minwax finish is clear, it’s presumably going to change the shade of your wooden table marginally. This is a direct result of the oil in the item. The shading change is little yet obvious. On the off chance that you like a warmer look to your wood, this could be an incredible decision for you. 

The downside to this Minwax finish is the number of coats you need. Minwax suggests a few coats. Notwithstanding, since your kitchen table is an overwhelming use household item, you’ll likely really need four or five coats for strength. Between applying, sanding, and drying, that implies that the restoring procedure is going to take a lot of time. 

If you’re persistence, this Minwax item makes a wonderful completed outcome. We suggest it for professional carpenters.

Pros
  • Convenient to use
  • Long-lasting
  • Great value for money
  • Cleansed easily
  • Style

Cons
  • Requires multiple coats which results in drying takes a lot of time
  • Yellow effect

 

2. General Finishes Arm-R-Seal oil-based topcoat

Amazon Check Price

The Second product that we have on our list is Arm-R-Seal based topcoat. It is one of the most highly rated finish that we have on our list. 

It’s highly durable, loved by many, and water-resistant. This semi-gloss finish comes in a 1-Gallon jar which is quite sufficient for you. 

Arm-R-Seal Topcoats are made with the most excellent urethane pitch, making them very tough and dependable. These oil-based finishes are detailed to be cleaned on with a cloth or applied with a foam brush, and they infiltrate to provide a deep-down safety to that “natural” look. 

Arm-R-Seal Oil Based Topcoat is an intense, durable wood finish that arrives in a can with a pry-off cover. It is an easy product to use. It’s likewise a smart thought to apply this item in an all-around ventilated zone. Since this Arm-R-Seal item is oil-based, it has a couple of disadvantages.

Oily fascinating woods, as Cocobolo, forestall Arm R Seal from drying. This can be bypassed by covering the wood first with shellac. The other serious issue with Arm R Seal is capacity. On the off chance that the fluid ingests an excess of oxygen, it begins solidifying and once it starts to solidify it won’t stop, so you would be advised to utilize it on something soon. 

 The oil content likewise implies that the finish takes a long time to fix. Indeed, the company suggests that you don’t clean the table for 30 days after you apply the last coat. 

In general, this oil-based completion is suggested for developed carpenters. It may require some investment to get the hang of the application procedure, however once you do, the final product looks close to perfect. 

Pros
  • Stylishness
  • Easy to use
  • Long-lasting
  • Value for money
Cons
  • Takes a lot of time to dry off

  • Yellowish-hue

3. Rust-Oleum Oil Polyurethane

Amazon Check Price

Varathane Ultimate Oil Based Polyurethane is profoundly strong and lets the characteristic excellence of wooden surfaces to be seen with higher clearness than other oil-based polyurethanes. 

It has an incredible scratch and stain protection which gives the most extreme protection to inside wood as the shading gets more refined after some time. The self-leveling recipe disposes of brush strokes for a spotless look. It has a shorter wait time before you can recoat. 

In the event that your kitchen table has a delightful wood grain, this completion is one approach to feature it; it’s intended to permit the grain to appear. The warm tone of the polish shows off the complexities of each bit of wood in your table. 

If we talk about its disadvantages then be prepared because it has a pungent smell. This is totally normal, yet it’s a smart thought to work in an all-around ventilated region or you can just keep a fan nearby. The finish dries rapidly, so it’s a smart thought to wipe up any dribbles right away. 

Despite the fact that this item is charged as clear, it really adds a golden sparkle to the wood. I suggest this Rust-Oleum finish, especially in case you’re completing a table with a prominent grain. It’s not suggested for use over paint on account of the inclination to yellow after drying

Pros
  • Easy to use
  • Less Dry time
  • Scratch protection is extremely high
  • Long-Lasting
Cons
  • A strong smell

  • Golden touch to your wood

  • Takes more than 4 coats 

4. General Finishes Enduro-VAR Water Based Urethane Topcoat

Amazon Check Price

The next we have on our list is Enduro-Var wood finish, which is a self-crosslinking, oil-adjusted, water-based polyurethane that looks more like an oil varnish than water covering. It ambers marginally, is exceptionally water-safe, and is both sprayable and brushable. 

Enduro-Var water-based topcoat shows adhesion well only over WATER STAINS, DYE STAINS, and RAW WOOD. Don’t use Enduro-Var over some other surfaces. 

The great nature of this paint is its life span and strength. It doesn’t create a delicate layer that feels like plastic.  It’s available in different styles (Flat, Gloss, Semi-Gloss, and Satin). It can be used for stair treads and handrails too. 

Rather, it creates a solidified surface that can withstand most conditions for a significant stretch. This implies the GF coating is more likely than not reasonable for open-air use, regardless of whether the label prefers or not. 

On the negative side, this is a pricey completion. Indeed, it is tied for the title of the most costly paint (with the ECOS paint, to be careful). Notwithstanding, the expense goes down fundamentally in the event that you purchase this paint by the gallon rather than the quart.

Pros
  • Long-lasting
  • Super easy to clean
  • Easy to handle
  • No strong smell
Cons
  • Expensive
  • Your wood will become yellow after some time

5. Waterlox Original Satin Finish

Amazon Check Price

On the off chance that your kitchen table has a lot of detail, this Waterlox finish can show it off. The completion has a delicate, satisfying gloss that features carvings and wonderful joinery, however, it’s not all that shiny that it shows fingerprints. 

Waterlox Original is produced using tung oil. The oil infiltrates the outside of your wood, making a water-safe completion. That implies that it stands up well to spilled milk, overwhelming use, and different fluids. It’s likewise generally simple to keep up. 

The main disadvantage of using waterlox is it has a strong pungent smell, you should use it in a well-ventilated room or keep a fan nearby. 

Remember that this Waterlox choice can’t be utilized alone — you’ll likewise need to apply the Waterlox sealer or a sealer from another brand. 

You should use a foam brush for the first 2 coats and a regular brush for the last coat for better results. 

Waterlox is suggested for your kitchen table on the off chance that you need a delicate gloss. 

Pros
  • Long-lasting
  • Easy to utilize
  • No sharp gloss
Cons
  • Strong smell
  • It also demands a separate sealer (Time and money consuming) 

6. Rust-Oleum Varathane Triple Thick Polyurethane

Amazon Check Price

If we talk about Varathane Triple Thick Polyurethane then it is 3X thicker than conventional polyurethane. Its advanced self-leveling recipe permits undertakings to be finished with just one coat implying that your project will complete 3Xs quicker while giving amazing insurance. 

It is perfect for use on all inside wood surfaces including furniture, entryways, trim, etc. It is a one-coat inclusion, water-based formula that gives great scratch and stain opposition. It dries quickly i.e. in 2 hours and can conceal to 50 sq ft. It is long-lasting and it protects your wood.  

The property of being satin silk finish upgrades the characteristic magnificence of the wood.
Sparing time is by all accounts one of the primary needs in the plan of this coating. This finish is intended to be applied in thick covers. This implies fewer covers per undertaking, and hence less time spent. Likewise, I can say this is a quick-drying item, which additionally spares time. You can use a paintbrush if it’s difficult for you to spread it out. 

This Varathane is additionally publicized as being made with a self-leveling formula. This component is significant for a covering that is intended to be applied multiple times thicker than most different coatings of this type. As far as I can tell, the item misses the mark in such a manner. 

On the upside, this is one of the most inexpensive finishes on the rundown, which settles on it the perfect decision for those on a tight spending plan. The leveling issues can presumably be managed by utilizing a somewhat thinner coat. 

Pros
  • Inexpensive
  • Drying time is quick
  • Easy to clean
Cons
  • Not to be used on white color
  • Only good for small projects
  • High viscosity
  • Even though it is written that it is a self-leveling formula, majority of the customers didn’t find it to be valid

7. Valspar Cabot Interior Oil-Based Polyurethane

Amazon Check Price

This is another item that plans to consolidate the characteristics of a water-based completion and an oil-based completion is Valspar Cabot Interior Oil-Based Polyurethane.

This one is intended to give the gloss and magnificence of an oil-based finish while additionally keeping up the hard and tough finish that is typically connected with water-based coatings. 

I can say that this crossbreed really accomplishes its motivation. It looks obviously better than a water-based get done with, being totally liberated from the dull and plasticized appearance that polyurethane can now and sometimes have (particularly when it gets old).  It can be used on all types of wood (oak, pine, fir, maple, etc.) 

Simultaneously, it does an awesome activity of opposing scrapes. I needed to think about how they accomplished this impact, however now I can disclose to one thing immediately: this quality comes at a significant expense. It dries to the touch inside 30 to 60 minutes and can be sanded or painted inside 2-3 hours. It can cover upto 500 sq ft. in a gallon. 

This is unquestionably not the decision for a major task except if you feel like spending a ton of money. 

Pros
  • Dries Quickly
  • Durable
  • It has a great shine
Cons
  • Highly Expensive
  • Limited quantity

8. Rust-Oleum Varathane Interior Oil Polyurethane

Amazon Check Price

Varathane Ultimate Oil Based Polyurethane is profoundly strong and lets the characteristic magnificence of wooden surfaces to be seen with higher lucidity than other oil based polyurethanes

Its amazing scratch and stain opposition give the greatest assurance to inside wood as shading gets more extravagant after some time. The self-leveling equation takes out brush strokes for a perfect look. 

Varathane Polyurethane offers the best scratch and stain opposition accessible. It helps you prevent the insides of the wood surfaces, for example, furniture, cupboards, trim and entryways 

Oil-based recipe gives the greatest durability and permits to an all the more even finish. It easily dries to the touch in 2 hours with inclusion up to 37.5 sq. ft., recoat in 4 hours. Gloss finish makes a polished and clean look 

This one is somewhat thick and shabby, so you won’t have a great deal of working time when you begin brushing it set up. This ultra-shabbiness additionally appears to discredit oneself leveling highlight that is publicized, as brush strokes can without much of a stretch be left on its surface.

Pros
  • Water resistant
  • Durable
  • Available in Gloss and Satin

Cons
  • Smell
  • Not easy to apply

Purchaser’s Guide 

Completing your wooden kitchen table requires some investment and exertion. At the point when you pick the correct choice for your abilities and way of life, you can take care of business directly on the first choice. As you take a look at various choices, here are a few factors that can impact your choice. 

Application matters the most. It is safe to say that you are new to wood finishing? Assuming this is the case, you should go for a finish that wipes on — that way, you don’t have to stress over making mistakes. 

What Is The Best Finish For A Wood Table? 

This isn’t a case wherein one decision will be ideal for everybody. We as a whole have various inclinations with regards to appearance, so the key is to go with whatever satisfies you. Generally speaking, smooth and shiny completions are increasingly well known for tables. Most assignments for which a table is utilized should be possible better with a flawlessly smooth surface. 

At the point when you’re resurfacing a wood kitchen table, the finish you pick matters. By doing your exploration and picking the item that is directly for your expertise level and venture, you can accomplish an excellent finish. 

Leave a Reply